Proflow Turbocharger Studs, Hex Nuts, M10x1.25 x 70mm, Stainless Steel, Natural, Paint Ideally used on any female

Ideally used on any female -8AN port when needing to adapt a 1/8 npt fitting or sensor

These heads are capable of producing over 600 HP straight out of the box

These compact stainless steel bleeders can be used for many brake and clutch applications and will replace your old ones for a more professional look

100:1 turns ratio and lower primary resistance produce high voltage output

Proflow Turbocharger Studs, Hex Nuts, M10x1.25 x 70mm, Stainless Steel, Natural, Paint Ideally used on any femalePart Number : PFETFS70M10 Grab a set of these stainless steel mounting studs, made to securely mount turbochargers and exhaust manifolds. Serrated flanged nuts are also included to reduce the chances of loosening. Note: Anti seize should be applied to all threads to prevent galling.